Introduction | Contacts | Purpose | Site Description | Measurements | DEM | Pictures
Measurements
Measurements are being made at the Robson Creek Tower, Atherton, Queensland, Australia. Canopy height is 28m.
Instrument Type | Make | Model | Situation |
---|---|---|---|
IRGA Open path - density CO2, H2O | LI-COR | LI-7500RS | 40m |
IRGA Interface Unit - atmospheric pressure |
LI-COR | LI-7550 | 40m |
3D sonic anemometer - wind velocities (u,v,w) - sonic temperature |
Campbell Scientific | CSAT3B | 40m |
Air temperature, Humidity - T, Rh |
Vaisala | HMP155 | 40m |
PAR Radiation - PPFD |
LI-COR | LI-190SB | 40m |
4 Component Radiation - SW-d, LW-d, LW-u, SW-u |
Hukseflux | NR01 | 40m |
Net Radiation - Rn |
Kipp & Zonen | NR Lite | 40m |
Rainfall - Rain |
Campbell Scientific | RIM8000 | 40m |
Pyranometer | Apogee | SP-110 | 40m |
Soil temperature (averaging array) |
Campbell Scientific | TCAV | -7cm 10m S of tower |
Soil heat flux plates (2) | Hukseflux | HFP01 | -10cm 10m S of tower |
Soil water content (time domain reflectometer) |
Campbell Scientific | CS616 | -6cm, -75cm, -150cm, -200cm 10m S of tower |
Data Logger - EC fluxes |
Campbell Scientific | CR1000X | 40m |
CO2 sensor | Campbell Scientific | GMP343 | 40m |
Phenocam - Field Camera 5MP - 30 minute images |
Campbell Scientific | CCFC-1879 | 40m |
Automatic weatherstation (T, Rh, Rain) |
Vaisala | WXT530 | 40m |